Do you think you can only clean your showerhead using vinegar? Not at all! Even though vinegar is a common household ingredient, there are many more you can use to get your shower squeaky clean.

In this article, we have listed the 4 best alternatives to vinegar that will help you clean your shower, and the best part is, you will find all these ingredients at your home!
You May Also Like: Best Low Flow Shower Heads | Best LED Shower Heads
how to clean shower head without vinegar?
How do you Clean a Shower Head with Baking Soda?
If you are thinking of an alternative to vinegar, baking soda is the most obvious choice. Both of these have the same amount of cleaning power, and thus if you don’t have vinegar handy, you can quickly use baking soda for your cleaning needs.

If your shower head is clogged, you can combine baking soda with a few other things to unclog and clean it.
Things required:
🛠️ A small bowl.
🛠️ Spoon.
🛠️ Water.
🛠️ Four tablespoons of baking soda.
🛠️ A needle or a thin stick.
🛠️ Cloth.
🛠️ Gloves.
Remove the showerhead
If your shower head is detachable, it’s advisable to open it before cleaning, making the process easy.
Creating a paste
As the name suggests, make a paste by combining baking soda and water. The consistency should not be too thick or very liquid. Ideally, it should be like toothpaste.
Cleaning the head
Now dip the showerhead in the paste for about 20 minutes to 1 hour. By doing this, you dislodge the rust and gunk sticking to the showerhead. However, if you cannot remove the showerhead from the wall, rub the paste all over it.
Use a steel scrub
Use a ball of steel wool to run the paste on the showerhead. This might require some time, especially if you have stubborn stains both inside and outside the showerhead. Now use the needle or stick to poke each hole and clean the gunk.
Clean with water
Now, wear your rubber gloves and use a small wet cloth to wipe the faucet. Finally, rinse it with water.
Test it
Once the process is complete, reattach the showerhead and check if it’s properly cleaned.
How do you Clean a Shower Head with Lemon Juice?
Besides vinegar and baking soda, lime is also a great cleaning agent, and it works exceptionally well for cleaning showerheads too. Like vinegar, lime is also acidic in nature.

If you want to try out this method, you can either use store-bought lemon concentrate or even buy fresh lemons for this purpose.
Dip a soft cloth in the lemon juice and use that to clean the showerhead. The acid will soon start working, and you can speed it up by scrubbing the fixture. To take the process a notch up, you can add a bit of salt to the lemon juice; this will make your shower head shinier by removing any grease or mildew from the attachment.
Leave the mixture on the showerhead for a few minutes, and then rinse it off entirely before drying.
How do You Clean a Shower Head with Coke?
Though you may not drink Coca-Cola, it’s commonly available in all stores and functions as a fantastic shower head cleaner. In fact, many people opine that Coke is perhaps the best cleaning agent available.

Here are the things you will need to use Coke as a cleaning agent:
🛠️ A can of Coke.
🛠️ Plastic bag.
🛠️ Rubber band.
🛠️ Cloth.
Coke to the bag
Firstly, choose a plastic bag that fits your showerhead, then add the Coke to the plastic bag. Then wrap the plastic bag around the showerhead so that it can soak on the Coke.
Soaking
Once you have set the plastic bag properly around the showerhead, allow it to soak for 30 minutes. To secure the bag in place, use the rubber band. However, it’s best if you can detach the head and soak it.
Remove bag
After the showerhead has soaked for some time, use a pin or needle to poke the holes on the showerhead to dislodge the deposited material that might be clogging the holes.
Wipe and wash
Now wipe the showerhead and wash it with water, and if you had removed the showerhead, put it back again.
Checking
Once the entire process is complete, turn on the shower to check if it’s been cleaned properly. Keep the water running through the showerhead for one minute to see if the attachment is working fine.
How to Clean the Showerhead with Bleach?
A clogged showerhead produces inconsistent water spray along with other issues. However, cleaning the showerhead with bleach can help restore its glory back.
You will need some basic ingredients to do this:
🛠️ A cup of distilled bleach.
🛠️ Spray bottle.
🛠️ Two portions of water.
🛠️ Bowl.
🛠️ Funnel.
Preparation
Mix well two cups of water with one cup of distilled bleach into a bowl.
Transfer
Now, using the funnel, transfer the mixture into an empty spray bottle.
Unfix the showerhead
If your showerhead can be unattached, unscrew the same and take it somewhere open, for instance.
Spraying
Once out in an open space, spray the showerhead with a sufficient amount of solution. Leave the mixture on the showerhead for 25-30 minutes.
Scrub
After 20-30 minutes, use a hard bristled brush to scrub the showerhead and then wash it with water.
You may have to redo the process a couple of times to get the desired results.
Using bleach can be dangerous if proper methods are not followed. Thus it’s essential to consider the following pointers.
Things to consider:
👍 It’s important to use a quality face mask and hand gloves while using bleach.
👍 Keep pets, kids, and the elderly away from the site of this cleaning method.
👍 Use diluted bleach as undiluted bleach is harmful.
👍 Read the safety instructions before using the bleach.
👍 Do not use this cleaning method if your showerhead is Chrome or powder coated.
How to Clean Shower Heads with Hydrogen Peroxide?
Being an antifungal agent, hydrogen peroxide is a good cleaner. Combining hydrogen peroxide with baking soda to form a paste and then cleaning the showerhead with the same can result in extraordinary outcomes.

The following steps will help you use this method better:
👍 Make a solution with equal portions of hydrogen peroxide and baking soda and put the solution in a plastic bag.
👍 If your shower head can be unattached then, immerse it in the solution. If it cannot be unattached, wrap the plastic bag around it.
👍 Keep the showerhead immersed in the solution for 20-30 minutes and then rinse with warm water under high pressure.
👍 Reattach the showerhead and test it.
How to Clean Shower Head using Disinfectant?
Using disinfectant is a popular method of cleaning a showerhead. However, one should practice this method with caution.
Removing
It’s essential to remove the showerhead by twisting it outwards manually. If required, it’s advisable to seek help from a professional to unfix it.
Scrub
Using a scrubber or a toothbrush, scrub the disinfectant on the showerhead and wipe out as much debris as possible.
Unclogging
Use a toothpick or needle dipped in disinfectant prick the holes to dislodge any debris stuck from inside.
Rinsing
Once the scrubbing is complete, rinse the showerhead with warm water.
Refix
Once the cleaning process is complete, reattach the showerhead gently by twisting it. Now test it by running water at full pressure to see if it’s functioning well.
Please note
This method has dual benefits; not only does it clean the showerhead, but it also kills the germs that it might have.
How to Clean Showerhead with Apple Cider Vinegar? (bonus)
If you don’t have white vinegar at home, you can use apple cider vinegar to clean your showerheads. Since they both are acidic, they are outstanding cleaning agents. One of the advantages of apple cider vinegar is that it leaves a less offensive smell after the cleaning process:

Unfix the showerhead
If your showerhead can be unfixed, unattached it and put it in a bowl containing apple cider vinegar mixed with baking soda and water.
Cleanse
Keep the showerhead dipped in this mixture for 15 minutes, then rinse it under high water pressure. Use warm water for this so that grime and baking soda residue dislodges.
Fix the Showerhead
Now reattach the showerhead and test it.
However, if the stains are too stubborn, use a toothbrush to scrub the showerhead thoroughly.
Frequently Asked Questions (FAQs)
If a showerhead is used daily, it gets clogged with calcium and other minerals in the water. Over time these clogged holes affect the water quality and can be harmful to health. Thus it’s essential to clean the showerhead regularly.
It’s advisable to clean the showerheads once a month. Ideally, it should not remain dirty for more than three months to ensure the quality of the water and the pressure.
Mostly, you don’t need a plumber to detach and attach your showerhead since most brands manufacture easy installation showerheads. You can do it yourself and that too without any tools as well. However, if you still choose to call a plumber, it’s a matter of your preference.
Conclusion:
Cleaning your showerhead regularly is not only a matter of aesthetics but is also essential to maintaining the health of the water. Thankfully, there are many ways to clean it without using vinegar. It’s advisable to clean your showerhead and your bathroom regularly to enrich the quality of your shower. Now that you know how to clean shower head without vinegar? let us know which one did you like the most,